TRITON

RNA - szafy rack hybrydowe

Modułowe szafy hybrydowych do domowych systemów dystrybucji IP20 / IK05 Data

Informacje

 Cable entries on the top, bottom and both sides of the cabinet allow its mounting into larger assemblies with other cabinets of this series, including power distribution cabinets. The cabinet door is raised towards the front to ensure the required bending radius of the cables, including fibre cables. Perforation on the sides helps the cooling of installed active elements. The installation of equipment with self-tapping screws on the inner plastic plate is quick and easy. Cabinets are supplied in modular height, where one module occupies 166 mm. Power distribution cabinets of this series are also included in these modules. The width and depth of the cabinet is uniform for all heights. The cabinet is universal for mounting on the wall or under the wall plaster. A cover frame is available for wall mounting. Thanks to the modularity of the cabinet, it is possible to use, for example, a data part with a height of 2 modules and 1 electro module, all covered by a modular frame with a height of 3 modules.

Swing side panels

Side panels on both sides of the cabinet are folded for easy assembly of mounted components. All removable and rotating parts are connected according to the standard.

Data distribution

Keystone Standard modules are ready for the installation of data and communication distributions, into which any cables can easily fit.

Power supply

On the opposite side of the data distribution system is the preparation for the installation of the power system 230 V. Depending on the size of the cabinet, there is an opening prepared for mounting classic sockets (with protective plastic box) and / or 10“ 1U mounting opening extended for the possibility of installing up to three common sockets.

Door construction

The plastic door panel and the entire structure support the installation of Wi-Fi devices.

Flat door version cabinet

The RNA data cabinet with flat door (version -X2 at the end of the code) was developed for installation in places where it is not possible to benefit from the advantages of the standard model of this cabinet. The total depth of this modified cabinet, including the door, is only 110 mm. However, using a flat door brings some restrictions. The keystone holder for fitting data distributions is perpendicular to the plastic mounting plate, causing the cables to interfere more with the designated space for installing active elements. Additionally, the part designed for power supply distribution differs the basic model. Because of the space restriction, it is only possible to use sockets with the outside sizes 45 x 45 mm (so-called Legrand standard) without a cover frame and the sockets are mounted on a removable mounting panel. The possibility of using a 10“ power panel with the RNA-02 and RNA-03 types remained unchanged, as well as other properties of the standard version of the cabinet (mounting on/under the plaster, modularity etc.). The space for the installation of the cartridge for optical welds in the space behind the plastic mounting plate meets the requirements of the relevant standards for home installation.

Data distributions

To achieve any data cabling, optical or metallic, a swing bearing panel with holes according to the most widely used Keystone Standard is prepared in the cabinet. All moving or detachable parts of the cabinet are interconnected according to the standard.

Slide lock

The cabinet door is secured with a plastic slide lock, providing a secure closure to prevent spontaneous or accidental opening and allows easy operation of the installed equipment.

Power supply

For mounting of the 230 V power distribution, a separable panel is available in every cabinet. This separable panel is designed for the installation of classic sockets with a protective plastic box. For larger cabinets, a 10“ distribution panel can be installed. In the flat door version, it is only possible to use the so-called Legrand size sockets – with the front panel of 45 x 45 mm.

    • IP20 / IK05.
    • Szafa jest zawieszana bezpośrednio na ścianie lub może być zamontowana w przygotowanej wnęce.
    • Szafa jest przeznaczona do samodzielnego montażu lub z szafą SNA.
    • Przepusty kablowe (multigate) w górnej, dolnej i obu bocznych ściankach szafy umożliwiają łączenie szafy w większe zestawy z innymi szafami z tej serii, w tym z szafą elektryczną typu SNA.
    • Konstrukcja szafy:

    – rama spawana z blachy stalowej o grubości 1 mm połączonej z tworzywem PEHD 8 mm.

    – drzwi ramowe połączone ze stalą o grubości 1 mm i tworzywem PP-H 1,5 mm.

    • Stelaż szafy oraz wszystkie demontowalne części (pokrywy boczne i tylne, drzwi…) są połączone kablami krosowymi, które muszą być prawidłowo zamocowane i włożone do złącz przez cały okres użytkowania szafy.
    • W dolnej części szafy znajduje się jedna śruba M8 do podłączenia kabli.

     

    • Otwory kablowe zakryte zaślepkami typu breakout znajdują się w górnej i dolnej części szafy oraz po bokach.

     

     

    Maksymalne dopuszczalne obciążenie – szafa: 20 kg; drzwi: 2 kg.

sprzętu (np. w środowisku, w którym istnieje zagrożenie wybuchem lub wilgocią).

 

  • Należy chronić przed:

– uszkodzenia fizyczne,

– niewłaściwe obchodzenie się z produktem,

– użytkowanie niezgodne z przeznaczeniem.

 

  • Niewłaściwa obsługa to w szczególności:

– przeciążenie (przekroczenie maksymalnego zalecanego obciążenia),

– instalowanie urządzeń, które mogą niekorzystnie wpływać na działanie i funkcjonalność szafy lub innych zainstalowanych urządzeń,

– ingerencja w konstrukcję lub projekt szafy.

Montaż szafy

Ten typ szafki wisi bezpośrednio na ścianie, mocowany za pomocą śrub, kotew i podkładek. Można ją również zamontować w przygotowanej wnęce w ścianie, stosując standardowe metody konstrukcyjne. Aby zapewnić maksymalną zalecaną nośność, należy solidnie przymocować szafkę do ściany o odpowiedniej nośności (ceglanej, betonowej lub podobnej) oraz zamontować cały sprzęt w taki sposób, aby równomiernie rozłożyć jego ciężar

Ochrona środowiska

  • Wszystkie części są wykonane z materiałów nadających się do recyklingu, a po wycofaniu szafy z eksploatacji należy ją utylizować zgodnie z odpowiednimi przepisami.
  • Certyfikat i zgodność

    • Ten produkt posiada certyfikat EZÚ Czech. Aktualny certyfikat jest dostępny na stronie www.triton-racks.com/certificates. Produkt jest w pełni zgodny z normą ČSN EN 62208 wyd. 2:2012 (EN 62208:2011).

Modułowe szafy hybrydowych do domowych systemów dystrybucji IP20 / IK05 Data

Zdjęcia

RNA-01-AS1-YXX-X2 RNA-02-A51-YXX-X2 RNA-03-AS1-YXX-X2 RNA-01-AS1-YXX-X1 RNA-02-AS1-YXX-X1 RNA-03-A51-YXX-X1